I don't like having to bring my banjo in for set up every time my action gets to low or too high. Standard Set-up … Re: Setting up a Tenor Banjo bridge The reason for the compensation is that when you push a string down to the fret, you’re actually bending the string a bit, and that sharpens it a bit. The intonation is improved by having the bridge in what is called the “sweet spot” on the banjo head. Bluegrass Banjo Set-Up for Beginners. When I'm playing a banjo with a Standard 5/8 bridge I have handy a 9/16 which is slightly lower and the 21/32 … Here is how you get it back in the proper spot: 1. First, measure from the nut to the 12th fret: 2. That will minimize bridge movement and keep tension on the neck. Bridge placement is important to get the best sound out of your banjo. Adjusting the head tension will affect how high the bridge sits, and will, therefore, affect your action. This is actually easy to do as a banjo has a floating bridge … So the bridge is … Put the Bridge On and Tune the Banjo - On most six-string banjos the bridge should be between 12 1/4 and 13" from the twelfth fret. Banjolele Bridge Placement. by Ben Freed ... To see if the neck is straight or bowed, sight down the neck from the nut to the bridge (with the strings tuned up to pitch), sort of like sighting down the … Place the bridge … Figure out which end of the bridge needs to go under the skinny strings, put the bridge under the strings, and start tightening the strings until the bridge … The above set-up procedure should be performed any time your banjo seems out-of-sorts in any way, and at least twice a year during the change of seasons (from summer to winter and vice-versa). Banjo action should always be set up or adjusted after the correct head tension is achieved. Alrighty. The tighter the head, the higher the bridge will sit, and the higher your banjo… So You have a banjolele (also called a Banjo Uke) that has a bridge that is not in the right place, or is detached completely.